Recommended Soldering Guidelines for Switches

21 May 2010

Most contamination problems can be prevented by exercising care during the cleaning and soldering process. Care should be taken not to immerse or spray unsealed switches during flux removal. Contact E-Switch for specific soldering recommendations. Generalized soldering procedures are outlined below.

HAND SOLDERING AND TEMPERATURES

Recommend soldering irons of 30 watt maximum with a tip temperature of 345°C (650°F) for 2-3 seconds and solder of 0.030 – 0.040 diameter.

SMT REFLOW (LEAD AND LEAD-FREE)

Table of SMT reflow profile temperatures and times for Pb and Pb-free solder assemblies.

Classification Reflow Profile

Temperature vs time graph of a reflow soldering profile showing preheat, soak, ramp-up, peak, and ramp-down stages

WAVE SOLDER TIME AND TEMPERATURES

When wave soldering, we recommend using a no-clean flux soldering process, rather than a process that requires washing. The fluxing process must be controlled so as not to have flux migrate inside the switch.

WAVE SOLDER

(Includes Pb-free, max component side preheat temp of 130°C)

Wave solder profile chart showing temperature vs time with preheat, soak, wave, and cooling stages.

Good venting is required. No-clean flux vapors can enter the switch if adequate venting is not available. The vapors will condense on the internal contacts and become an insulator when they solidify.

  • Preheat temperature/time: Circumferential temperature of the PC board not to exceed 100°C (212°F) for 60 seconds.
  • Soldering temperature/time: not to exceed 260°C (500°F) for five seconds.
by Jeremy Biggs • 5 November 2026
Piezo Buzzer – Turning Vibration Into Sound
by Jeremy Biggs • 20 May 2026
Looking for a Switch - Download E-Switch New Product Matrix
by Jeremy Biggs • 8 May 2026
State of the Art, Inc. Introduces AEC-Q200 Qualified Thick Film Chip Resistors
by Jeremy Biggs • 1 May 2026
E-Switch 6mm x 6mm Tact Switch Family
by Jeremy Biggs • 14 April 2026
Sealed Speaker Enclosure Design for Small Speakers (Practical QTC = 0.707 Guide)
Promotional banner for PV Series anti-vandal switches, with red background and metal push buttons
by Jeremy Biggs • 14 April 2026
Explore durable anti-vandal pushbutton switches with IP65/IP67 ratings. Contact us for details on our extensive range today!
by Anthony Varriano • 17 January 2023
Explore E-Switch's miniature switches for handheld & wearable tech. Request brochures & samples to learn more about our solutions.
by Erin • 12 January 2023
Dayton, OH, USA – PUI Audio is pleased to announce the addition of Reptronics to their growing list of sales representatives. Reptronics is a manufacturer’s representative company operating within the United Kingdom and Ireland, and currently work with several global manufacturers of high-quality electrical components. PUI Audio selected Reptronics to join their global sales network […]
by Erin • 16 December 2022
Reptronics Ltd supports Principals in selling electronic components in the UK & Ireland. Contact us to enhance your product reach.
by Anthony Varriano • 8 December 2022
When snow falls, don’t get mad. Be glad you have the switches for moving snow and ice this winter. The post Switches for Moving Snow and Ice appeared first on E-Switch, Inc..