All About IP Ratings and Ingress Protection

20 May 2010

Definition of Ingress Protection Codes

The International Electrotechnical Commission’s 60529 Standards document specifies an international classification system for the sealing effectiveness, or ingress protection, of electrical equipment enclosures against the “intrusion of foreign bodies and moisture.”

Degrees of Ingress Protection: First Digit

The first digit of ingress protection ratings indicates the degree of protection against dust.

0 No protection
1 Protected against solid objects over 50mm (e.g. accidental touch by hands)
2 Protected against solid objects over 12mm (e.g. fingers)
3 Protected against solid objects over 2.5mm (e.g. tools and wires)
4 Protected against solid objects over 1mm (e.g. small tools and small wires)
5 Protected against dust; limited ingress (no harmful deposit)
6 Totally protected against dust

Degrees of Ingress Protection: Second Digit

The second digit of ingress protection ratings indicates the degree of protection against moisture.

0 No protection
1 Protected against vertically falling drops of water
2 Protected against direct sprays up to 15° from the vertical
3 Protected against sprays up to 60° from the vertical
4 Protected against sprays from all directions; limited ingress permitted
5 Protected against low pressure jets of water from all directions; limited ingress permitted
6 Protected against strong jets of water (e.g. for use on ship decks); limited ingress permitted
7 Protected against the effects of temporary immersion between 15cm and 1m for 30 minutes
8 Protected against long periods of immersion under pressure

Based on the above, our standard for defining a “process sealed” switch is “sealed to meet the minimum requirements of IP67.” This means that a switch rated IP67 is “dust-tight” and will pass a water submersion test at 40 inches (1m) for up to 30 minutes.

Due to the variables encountered in actual water-wash machine processing, IP67 does not necessarily insure that water entry into the switch cannot occur. The water-wash pressures and air-knife drying that occurs in modern PC board machine-washing can exceed the seal requirements of the IP67 rating.    

Common IP Ratings for Switches

IP40 – Most switches fall within this rating, where there is protection from solid objects larger than 1mm

IP54 – Typically referred to as weather resistant, meaning it is resistant to rain, but not a soaking with a hose

IP65 – Same as above, but can protect against a water hose

IP66 – Protected against strong jets of water

IP67 – Protected against temporary water immersion in less than 1 meter deep

IP68 – Protected against long periods of immersion under pressure

by Jeremy Biggs • 5 November 2026
Piezo Buzzer – Turning Vibration Into Sound
by Jeremy Biggs • 20 May 2026
Looking for a Switch - Download E-Switch New Product Matrix
by Jeremy Biggs • 8 May 2026
State of the Art, Inc. Introduces AEC-Q200 Qualified Thick Film Chip Resistors
by Jeremy Biggs • 1 May 2026
E-Switch 6mm x 6mm Tact Switch Family
by Jeremy Biggs • 14 April 2026
Sealed Speaker Enclosure Design for Small Speakers (Practical QTC = 0.707 Guide)
Promotional banner for PV Series anti-vandal switches, with red background and metal push buttons
by Jeremy Biggs • 14 April 2026
Explore durable anti-vandal pushbutton switches with IP65/IP67 ratings. Contact us for details on our extensive range today!
by Anthony Varriano • 17 January 2023
Explore E-Switch's miniature switches for handheld & wearable tech. Request brochures & samples to learn more about our solutions.
by Erin • 12 January 2023
Dayton, OH, USA – PUI Audio is pleased to announce the addition of Reptronics to their growing list of sales representatives. Reptronics is a manufacturer’s representative company operating within the United Kingdom and Ireland, and currently work with several global manufacturers of high-quality electrical components. PUI Audio selected Reptronics to join their global sales network […]
by Erin • 16 December 2022
Reptronics Ltd supports Principals in selling electronic components in the UK & Ireland. Contact us to enhance your product reach.
by Anthony Varriano • 8 December 2022
When snow falls, don’t get mad. Be glad you have the switches for moving snow and ice this winter. The post Switches for Moving Snow and Ice appeared first on E-Switch, Inc..